2072532

DIN 110 Size 2 Square Body Ultra Rapid aR

SIBA logo. SIBA written in bold red font on a yellow background with a red circle around the logo.

Amp Range:

250 - 800 Amps


Voltage:

1250VAC


Part # Amp Rating Voltage
2072532-250 250A 1250V
2072532-315 315A 1250V
2072532-350 350A 1250V
2072532-400 400A 1250V
2072532-450 450A 1250V
2072532-500 500A 1250V
2072532-550 550A 1250V
2072532-630 630A 1250V
2072532-700 700A 1100V
2072532-800 800A 1100V

We're here to help

We promise to respond within 4 business hours (AEST).
Or you will receive $100 off your next purchase. Read how it works

Get a quote technical support 1300 387 326

Can we help you?

We promise to respond within 4 business hours (AEST) or you will receive $100 off your next purchase. Read how it works

Clock showing 4 o'clock drawn in thick orange line.

Reply in 4 Hours

You will receive $100 off your next purchase if we do not reply within 4 business hours (AEST).
Icon for transport shows drawing of truck in motion drawn in orange bold lines.

Same Day Dispatch

All orders are shipped same day! In most cases your order arrives the next business day.
Ribbon with dollar sign drawn in bold orange lines

Lowest Price Guarantee

If you find a cheaper advertised price for an identical item, we will beat that price by 10%! How it works.

Happy face with bangs logo drawn in thick orange line.

Satisfaction Guarantee

If you are not satistfied with your purchase, return it. Read our 

Return of goods policy.

Top FAQs

VIC - HEAD OFFICE / WAREHOUSE

27 Viking Court

Cheltenham VIC 3192


NSW - SALES OFFICE / WAREHOUSE

29/8-10 Barry Road

Chipping Norton NSW 2170


QLD - SALES OFFICE

1 / 26 Duke Street

Sunshine Beach QLD 4567


WA - SALES OFFICE

67 Howe Street

Osborne Park WA 6017


We'd love to hear from you! At Fuseco, rather than publish generic prices, we prefer to give you an individual quote. This ensures that we provide you with the best possible pricing to meet your needs.


The quickest way to place an order is to give our customer service team a call or send us an email. We promise to respond within 4 hours or you get $100 off your next order, however we usually respond within 1-2 hours to email enquiries. So go ahead and speak to us, we'd love to help you with your needs.

Fuse Products

  • For all orders over $100 (excl. GST & freight), freight is FIS (Free into Store).
  • For all orders under $100 (excl. GST & freight), a freight charge of $25 + GST is applicable.
  • Additional fees may apply for deliveries to the Northern Territory and remote areas.


All Other Products

  • Freight charges POA (Price on Application)
  • FOT (Customer nominates own carrier and accepts all charges)


Freight details

Semiconductor fuses are fuses that have been specifically designed to protect semiconductor devices. They are often also referred to as solid state fuses, rectifier fuses or ultra-rapid fuses. Semiconductor devices are extremely sensitive to current fluctuations and require special protection. To perform this function, semiconductor fuses are able to open the circuit (blow) significantly quicker than other fuse types, and it is extremely important that they are replaced by direct equivalents when required. Semiconductor fuses belong to the utilisation categories aR, gR and gS. 

The I²t value of a fuse is a measure of the energy which is required to open the fuse element and to interrupt the current. It is determined by factors such as the design of the fuse element, the type of filler, etc. The I²t value is also a direct measure for the let-through energy which is exposed to the item being protected by the fuse in case of an over-current situation. It is a function of current squared and time, hence it is expressed in A²s (amps x amps x seconds).

Semiconductor fuses are not selected like other fuse types. The main selection criteria for a semiconductor fuse is its I²t value…. even more important than its current rating! This is because semiconductor devices are extremely sensitive to current fluctuations and the maximum amount of let-through energy that they are exposed to during an over-current needs to be accurately controlled. This is super-important when selecting fuse protection for semiconductor devices.


If you are replacing an existing fuse, make sure that the new selected fuse has an I²t value that within ±10% of the original fuse’s I²t value. In this case, I²t values need to be compared at the same system voltage.


If you are selecting a semiconductor fuse for a new application, the I²t value of the selected fuse must be lower (or quicker) than the lowest I²t value of any of the components being protected. This ensures that the fuse opens before allowing any damaging let-through current to reach the components. In addition, refer to the question ‘Can I enclose a semiconductor fuse in a fuse holder?’ in this section. 

Semiconductor fuses run hotter than most fuses. In order to achieve a very accurate melting temperature, these fuses have been engineered with a high proportion of pure silver in their element and their body filling is high quality silica, which helps to draw heat away from the fuse element. Due to this fact, it is generally accepted that they should not be enclosed so as to ensure sufficient cooling of the fuses so they can operate as specified. Fuse cooling is very challenging if the fuse holder doesn’t allow sufficient airflow around the fuse.


The ‘power loss’ value of a fuse is a measure of the heat emanating from the fuse under full load. It is used to determine how quickly the fuse dissipates its heat. This is also known as the ‘heat loss’, ‘watts loss’ or ‘heat dissipation value’. Power loss is measured in Watts. If any fuse is to be used in a fully enclosed holder, then the power loss rating of the fuse holder used must be greater than that of the fuse to ensure that there is sufficient dissipation of the heat around the fuse. In other words, the fuse holder’s ability to tolerate heat must be higher than the heat the fuse produces. If this is not followed, the fuse holder may warp, melt or explode. Due to the fact that semiconductor fuses run much hotter than type gG or type aM fuses, extra care must be taken when choosing fuse holders for them. 

Please don’t! If you do, then in the event of an over-current, you run the risk of experiencing critical damage to the semiconductor devices in the circuit. In plain words, your expensive components will blow before your fuse does.

Russell King - JOHNSON ELECTRICAL SERVICES

I called thru at 430pm EST and was put in contact with Sally in Vic! From the moment the call was answered Sally couldn’t do enough to try and help..... then she organised for Sydney to open up at 6am for me to collect the fuses. As a service-based company it was very refreshing to come across someone that went over and above to help us client back into production as quickly as we could!

Russell King

DIRECTOR - JOHNSON ELECTRICAL SERVICES

Michael, you asked me if I was happy with your service. Let me tell you that Fuseco had quoted and delivered the products via airfreight from Germany before our other suppliers returned our call. Outstanding!

Peter Stremski

LAWRENCE AND HANSON

I would like to acknowledge the exceptional service provided by one of your employees over the Xmas break. On Christmas day we lost a 22kV underground feed to a very important part of our business and were desperate for some replacement HV fuses. I found your emergency contact details on the web a and immediately called. The person who answered was very helpful and arranged an emergency transport to our site. The next day, we were back up and running! We are a remote operation 1800kms from the nearest city and average service is the norm.

Gregory Blair

ELECTRICAL MAINTENANCE AT BHP BILLITON

Thanks for ensuring that our order was delivered on time. Again, thank you for going the extra 8,000 km!

Don Hajdu

LOGISTICS OFFICER AT GRIDSENSE

I just wanted to let you know what great service your people gave us over the Christmas break and went to great lengths to make sure that we got the right fuses and that they were delivered on time. Dealing with your company a pleasure. Keep up the good work.

Kerry Prasad

MIDDENDORP TRARALGON

I don’t normally do this but I feel compelled to thank you in writing. I have been in the electrical industry for 25 years and without a doubt the most competent and trustworthy supplier I have used over this period of time is Fuseco. This is a demanding industry and how your team keeps performing above expectations is exceptional to me.

Ross Adam

EXPORT DEPT AT REXEL

I have dealt with Fuseco for the last 6 years for all our fuse requirements and find they provide the highest quality service and on-going support to our business for our day to day operations and for emergency/ heatwave as they arise. During a heatwave event in January 2014, SA Power Networks had critical fuse demands. Fuseco were extremely responsive in expediting stock requirements and organising special air freights to meet our urgent demands. Their customer service is excellent and key KPI’s measured against the contract are always above target.

Peter Ashenden

INVENTORY ANALYST AT SA POWER NETWORKS

Any company that can pull a rabbit out of a hat like that definitely has my attention!

Dane Branham

PROJECT ENGINEER AT RIO TINTO

Technical Support

Our experts are all pre-eminent leaders in electrical products who provide excellent support in their areas of expertise.

Technical support

Talk to an expert

Our friendly team are highly trained product experts who really enjoy helping customers find what they need.

1300 387 326

call 1300 387 326

Enquire by email

We promise to respond within 4 business hours (AEST) or you will receive $100 off your next purchase.

Enquire now